...

• visible : Set to false to hide a control and true to make the control visible.
• value : Read or write the value of a control. This is not applicable to sections, tabs and other controls where it does not make sense to set a value.
• enabled : Set to false to disable (grey out) a control so that a user can not change its value and true to enable it. This is not applicable to sections, tabs and other controls that do not make sense to disable/enable.
• expanded : Set to false to collapse a group control (sections controls only) and true to expand a group control.
• selected : Set to true to make a tab the selected tab (tab controls only).
• valid : The value of this property is true if the control contains a valid value otherwise false.  Validity is based on the control’s type.  For instance a numeric control will be invalid if the user enters a string value that cannot be converted to a number.  This property can be read as well as written.
• required : Set to true to make a control required and display a yellow background color. (NOTE: only affects palette controls and not controls generated from XSD schema data source). This is also a property of section controls. Setting a section required to false automatically sets all inner controls to not required.
• options : This property enables dynamic setting select control options (radio, dropdown & checkbox controls only).
• label : This property sets the label seen on any control including sections.
• help : This property sets the help text.
• hint : This property sets the hint seen on hover.
• status : This property sets the error message display whenever the control's value is invalid. The one exception is the Required Property for Controls in an Accessible form/flow.
• clicked : This property works with trigger controls.  Its initial state is false.  When a user clicks a trigger its state turns true.
• printable: Set to false to remove the control from both the printable view and PDF submission document.
• itemAdded : This property works with repeat controls.  Its initial state is false.  When a user clicks "+" to add a repeat item AND when a repeat item is added via a Document URI as the form loads its state turns true.
• itemRemoved : This property works with repeat controls.  Its initial state is false.  When a user clicks "-" to delete a repeat item its state turns true.
• itemIndex : This property works with repeat controls. When an itemAdded or itemRemoved event fires the value of itemIndex is set. For itemRemoved events itemIndex will return -1. For itemAdded events itemIndex will give you the index of the added item

...

• form.load : This property is true when the form is first loading. It is useful for setting default values via rules that you need to be set before the user starts interacting with the form. This also holds true for flows. This property is true when each step of a workflow is first loading.
• form.unload : This property is true when users click the form's submit button. It is useful for setting control values just prior to the execution of the form's Doc Actions and Form Actions. This also holds true for flows. This property is true when the user clicks the continue button for each workflow step.
• form.positionUpdated : This property is used for the Geo location feature. You can fire a rule using this special identifier every time the position is updated.
  

Examples of identifiers used in  rules are:

...

• Browser independence. We found it impossible to get these to run reliably in so many versions of so many browsers, especially IE. A bug in your rule (e.g. an infinite loop) will crash the browser and in some cases will require a Windows reboot. On the server, these run in separate threads with lower priority and timeouts so it will not impact the form server.
• The ability for the rule to do server-side things like http:get () to a database connector, invoke a REST service etc. These often reside behind the firewall and are not accessible to the browser.
• The rules are not exposed to the browser at all so any sensitive information in the rule (e.g. a password) won’t leave the server. However, we do not recommend putting any sensitive information in a rule.
• Rules can use information like the currently authenticated subject user id, name, email etc. though technically it would be possible to make this available on the browser if required. However, providing this information in the browser is a potential security hole.
• Rules can also modify a control – in theory, this can cause large-scale changes to the form’s valid state. Think of an optional XML complex type that has a deeply nested data structure inside it with some required and some optional elements. If any element has a value, all the other required elements become required. It’s much easier and efficient to analyze the form on the server although, technically, this is also possible in the browser. It can be extremely slow for large forms, especially in IE or if someone is running on a slower machine.

These pros of excuting rules server-side mitigate the couple cons:

...

There is a potential for performance bottlenecks. However, this is rare since rules are not compute intensive typically. We think the benefits outweigh the drawbacks here.

Dates and Times

There are several special considerations when writing rules using date, time and date/time controls. You can also find many working samples in the Rules Examples chapter.

...

The validator also supports global directives. Use the global directive to identify additional global objects and functions defined in the execution environment and made available to the rule for which it is not appropriate to include a var statement in the rule code itself. One directive can be used to list all additional globals on a single line. Currently there are no known cases requiring the use of the global directive.  

Rule Editor Functions

The Rule Validator includes an enhanced editor designed to provide an easy experience when developing rules.The rule editor box includes the following features:  

Features	Description
Line Numbers	Line numbers in the rule code editor make it easier to correlate reported validation errors with the line of code.
Bracket auto close	Type a {, ( or [ and the closing bracket is automatically inserted.
Match Bracket	Place the cursor on a bracket and both it and the matching bracket are shown in a matching distinctive color (green).
Syntax Hi-lighting	JavaScript syntax hi-lighting with keywords, variables, comments, etc. shown in distinctive colors.
Auto Indent	New lines are auto-indented according to generally accepted code formatting rules.
Code Folding	Bracketed code blocks (functions, if-then-else blocks, etc.) are collapsible. Click the arrow immediately to the right of the line numbers to collapse/expand code blocks.
Full screen edit mode	Expand the editor to full screen mode if you need more space to work. Click the "double arrow" expand icon (directly above the editor box) or press F2 when your cursor is inside the Rule box to expand to full screen. The ESC key returns you to small window mode.
Auto Complete/Hinting	When composing a rule, the designer can pick from a list of available controls and their properties directly within the rule editor. The pick list is context sensitive and will behave differently based on where the cursor is located when it is invoked. When on a blank space or immediately following an open bracket/brace, it can be manually invoked using Ctrl-Space to bring up a list of controls. Typing a dot (.) immediately after a  control name or after the index ("[i]") that follows a control name will automatically bring up a context sensitive pick list of properties applicable to that control for selection. You can type the first letter of the item you are looking for and the property starting with that character will be highlighted in the list. Continue typing and the matching options will progressively narrow to the characters typed. Double click your choice using the mouse or press the Enter key to select an item. Any other key dismisses the pick list. . See the example below.
Help	The help icon displays a small help window listing the hot keys described above - (F2, ESC and Ctrl-Space)

...

• START - signals the start of an execution that may span one or more rules and Doc URIs 
• END - signals the end of the execution of a batch of one or more rules plus the total execution time in milliseconds
• ERROR - any errors that were thrown NOT in the context of executing rules
• START_RULE - signals the start of a rule execution
• END_RULE - signals the end of a rule execution plus the execution time of this one rule in milliseconds
• RULE_ERROR - any errors that happened while executing the specific rule
• RULE_EVAL - A message displaying the rule script
• RULE_DEP - one for each rule dependency. Examples of dependencies are: form.load, trigger clicked, if conditions that trigger rules, control values changes on the right hand side of assignments, etc..PROPERTY
• RULE_SET - one for each control property set by the current ruleSCHEDULE - shows the next rule to execute and the remaining rules in the agenda/batch. This event makes it a bit easier to track what the rules engine is doing when debugging.
• PROPERTY_SET - one for each control property set by the current rule
• HTTP_START - signals the start of an http call (get, put, ...)
• HTTP_END - signals the end of the http call + status code and timing
• HTTP_RESPONSE - a message that dumps the first few lines of the http response
• HTTP_ERROR - any errors that may have been thrown while performing the http call
• DOC_READ_START - signals the start of a manually set Doc URI read
• DOC_READ_END - signals the end of a manually set Doc URI read
• DOC_READ - signals the success or failure of the Doc URI read
• LOG - a user defined message that can be generated from a rule using frevvo.log('my INFO message') or frevvo.log('DEBUG', 'my debug message')
• INFO - this statement informs the designer when the set of property values in a flow during form state initialization are ignored.

...

To set the timeout to 15 seconds set value="15000"

Rule Execution Priority

This experimental features lets you control the order of execution in complex rules usage. There is no UI for this feature. Please contact customer support for information.

An example usage: Rule1 is called when multiple form field values change. Rule2 has many XXX.value = ... that would trigger Rule1. If the rules engine happens to always picks Rule2 to execute first, you would execute Rule1 more than is needed. While rule ordering doesn't cause a behavior issue, if Rule1 happens to perform a more time consuming operation such as retrieving data from a database, this may cause a performance issue. Rule execution priority enables you to tell the rules engine to execute Rule1 before Rule2. Then each subsequent call to Rule1 would be prevented.

Rules and Repeating Controls

...

Follow these important points when writing your rule:

1. Your rule can set minOccurs to 0 even if the design time setting > 0, but you cannot set minOccurs to a value which is greater than the current maxOccurs.  

2. Your rule can set maxOccurs to a value that exceeds the design time setting, but you cannot set maxOccurs to a value below the current minOccurs value.

3. Repeat items and table rows are added if your rule increases the Min# property and are removed when the rule decreases the Max#.

4. Added rows due to increase in Min# will trigger the itemAdded property. 
5. This feature can be used for schema controls, but min/maxOccurs values have to be set within the limit given in the schema. For example, if the schema has text control defined with minOccurs=2 and maxOccurs=100. We cannot set minOccurs less than 2 and max greater than 100.

...

Security Subject Information from LDAP

LDAP supports both the standard subject attributes and custom attributes. When a user is successfully authenticated by the LDAP security manager, Live Forms automatically retrieves Last Name, First Name and Email Address for this user from the LDAP server. You can retrieve custom attributes in addition to the standard ones from Active Directory and pull the data into your form/flow using  business rules. 

...

Attributes with more than one value are also supported. For example, The carLicense attribute can return multiple licenses. You can write a rule to populate dropdown options with those values. Make sure the carLicense attribute is added to the custom field on the LDAP Configuration screen and of course, there are multiple carLicense attributes, each one containing a different value for the dropdown options, set up for appropriate users on the LDAP server.

...

Built-in Methods

 provides built-in helper methods for common functionality required by business rules.

...

Click the View All button to display all the rules in your form/flow. Then use a browser search (Ctrl+F) to highlight all the places in your rules where a particular search item is mentioned. For example, if you were looking for all the rules that set the required property for a section, search for  'SectionName.required' (replace SectionName with the name of your section ) . This view might be helpful when correcting errors reported by the Rules Editor.

...