Live Forms v7.0 is no longer supported. Click here for information about upgrading to our latest GA Release.

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 21 Next »

Live Forms In-house Quick Start Installation Guide

 provides a downloadable version for local installations that runs  without further configuration on a Windows systems. This bundle includes an HSQL embedded database. If you are planning to install a trial version of , sign up and register to download the software. Follow the steps listed below in the The Quick Start Installation Guide for easy setup of  in-house on a Windows system. 

 

Installation Guides

 On This Page:


Hardware Requirements and Memory Configuration for your  Server

Click here to review the recommended hardware requirements and memory configuration for your  in-house server.

Live Forms™ in-house Quick Start Installation Guide: 

The steps below describe the Tomcat bundle installation on a Windows system.

Prerequisites

The following prerequisites must be satisfied in order to run in-house.

  • http(s) connectivity to http://www.frevvo.com/ for licensing and software update.
  • Review the Supported Platforms list.
  • You must have the Java Development Kit (JDK)  versions 1.7 or 1.8 or Java Runtime Environment (JRE) versions 7(update 21 or greater) or 8 installed on your system. Click here to go to the Java SE Downloads site if necessary.



  • Version 7 downloads are located further down the page.
    Be sure to accept the license agreement and select the correct version 32 (x86) or 64 (x64) bit depending on the architecture of your Windows system. 
  • When the download completes, click Run to install it.
  • Return to this page and continue with Set Up the Environment when the download and the installation are completed.

 Set Up the Environment

  • If you downloaded the JDK then make sure that the JAVA_HOME environment variable is set to the installation directory of your JDK  for example, C:\Program Files\Java\jdk1.7.0_09. Refer to JDK or JRE Prerequisite for the details.

  • If you downloaded the JRE then make sure that the JRE_HOME environment variable is set to the installation directory of your JRE for example, C:\Program Files\Java\jre7. Refer to JDK or JRE Prerequisite for the details.

Quick Start Installation

Once you have a machine that satisfies the above requirements, you must:

  1. Register on frevvo's web site.
  2. Download the software.
  3. Generate your Customer License key.
  4. Unpack the download zipfile
  5. Install the customer license key.

These steps will guide you through the process.

Download .

  1. Register on frevvo's web site. 

     
     
  2. You will see this message:



  3. You will receive an email to the address provided with a link to confirm your email address. 

     

  4. Click on the email link to download the software to your local computer. We will unpack and install it after the license key is generated. Register a  user name/password then click Submit

     

  5. You can generate a 30 day license by clicking on the Generate a trial License link on the screen that displays or clicking on the license manager link in the email you receive confirming that your activation was successful. 

    Save this email as it provides important information about Live Forms and links to the License Manager, customer support, documentation and Quick Start videos.

  6. Login with your registered user name/password to access the License Manager. 



  7. You can manage your personal information and generate/manage in-house and Confluence licenses from this page. Click on the link to select the type of license you wish to generate.



  8. Click the link to generate a  full feature 30 day trial license. 

     

  9. Copy the license key. Click Back to My Account and logout of the License Manager.

Unpack the download zip

7.0 requires the Insight server for the Reporting feature. The Insight server is included in the tomcat bundle. It is recommended that you start the Insight server first before starting . Further configuration is not necessary for the trial period. Follow these steps:

  1. Unzip the frevvo zip file (downloaded in Step 4 in the previous section) into a location of your choice: e.g. c:\frevvo.   We'll refer to this directory below as <frevvo-home>.
  2. Ensure that you do not have another server running on ports 8082 or 8983
  3. Open a command prompt. Navigate to <frevvo-home>\solr-5.4.1.
  4. Type bin\solr.cmd start to start the Insight server. This starts the Insight server in the background, listening on port 8983.



    You will see this message:



  5. Browse http://<your server:port>/solr to verify the Insight server is running. The <server:port> default values are localhost:8983. Change <your server>  to the server name and <your port> to the port the Insight server is running on if they are different than the defaults. Do not include the angle brackets <>. You will see the Insight server (Solr) dashboard with the current status:



    If you close the Insight server (Solr) startup window, the server will stop running. Leave the window open or set up Live Forms and the Insight Server to run as Windows services.

  6. Navigate to <frevvo-home>\frevvo and double-click Start frevvo. This starts tomcat on port 8082 with  pre-configured.
  7. Open the ' home page in a new browser window. e.g. http://localhost:8082/frevvo/web/login
  8. Enter the license key you generated in the License Key box. Click Submit. The  login screen will display.



If you start before the Insight server, you will see this message when you browse the login URL. Follow these steps to start the servers in the correct order:

  1. Naviagate to your <frevvo-home> directory.
  2. Run the stop-frevvo batch file.
  3. Open a command prompt. Navigate to <frevvo-home>\solr-5.4.1.
  4. Type bin\solr.cmd start to start the Insight server.
  5. Browse http://<your server:port>/solr to verify the Insight server is running. The <server:port> default values are localhost:8983. Change <your server>  to the server name and <your port> to the port the Insight server is running on if they are different than the defaults. Do not include the angle brackets <>.
  6. Naviagate to your <frevvo-home> directory.
  7. Run the start-frevvo batch file.

Create a New Tenant

  1. Click the "Manage Tenants" link on the page that displays.
  2. There is a single tenant named d. This is the default tenant.
  3. Click the  icon to create a tenant, fill in the form and submit it. The new tenant will be created.

We recommend that you do not use the admin user to create your own forms. Add a new user for that purpose.

Add a New User

  1. Click the  icon, to administer the newly created tenant.
  2. On the page that is displayed, click the "Manage Users" link.
  3. There is a single user (the administrative user you defined when you created the tenant). 
  4. Click the  icon, fill in the form and submit it. Assign Roles to the user as desired. Note that you must assign the frevvo.Designer role to any users who wish to design forms.
  5. The new user will be created. Create as many users and assign them roles as needed.
  6. Logout of the admin account.
  7.  is installed and ready for use. You can start building forms and workflows right away.
  8. Login as one of the newly created users with the frevvo.Designer role by filling in the user@<your tenant> ex: designer@mycompany and the password that you assigned to this user on the Login screen. The page that displays is called the Application Home Page.
  9. If you are new to  and have not created any applications yet, you will see the following Getting Started message. Click the link to navigate to the Evaluation Guide for your version.

     

You can find examples on creating your own workflows on the Tutorials page. Refer to Getting Started for the next steps to follow to create forms/flows.

tenants in the cloud are initially configured with the frevvo Default security Manager.  Once you have purchased a license for your tenant, you can switch the Security Manager of your tenant and retain forms/flows, users, roles and submissions.

Tenants using the Default Security Manager can be migrated to:

  • Default Security Manager → LDAP
  • Default Security Manager → SAML  
  • Default Security Manager →  Azure SAML
  • LDAP → SAML
  • LDAP → Azure SAML

If you are planning to switch the Security Manager of your tenant to LDAP or SAML Security Managers in the future, make sure the users created in the default security manager tenant have the same user names as the users in your LDAP server or identity provider.

If you want to change the Security Manager of your tenant, cloud customers should contact sales@frevvo.com to initiate the process.

Detailed Installation Instructions

When you have completed the trial period and you are ready to customize your server software, please see the detailed In-house Installation Guide.

The bundle includes an HSQL embedded database. If you use the HSQL database during your trial period, you cannot migrate the data (user, roles, applications) automatically from HSQL to your production database. Once your production database is in place, you must manually: 

  1. Create the tenants.
  2. Use csv upload feature to move your users/roles to the tenant.
  3. Download and upload the applications from designer user accounts in the trial database to the designer users in the new database.

 

 
  • No labels