Add New User

Create new tenant users on the Manage Users page.

Click add new user icon at the top of the user list.

1. Complete the new user form. 

2. User names can contain characters, numbers, dot (.), hyphen (-) and the underscore (_) and cannot start with a number. Max length is 50 characters.

3. Change Password on Next Login is checked by default.  recommends keeping this checked for best security practices. Users will be prompted to enter a new password that meets strength requirements on their first login.
4. Assign roles to the user. NOTE: Assign the special role frevvo.Designer to any user who needs permission to create forms and workflows.
5. You can assign multiple roles to any user by clicking the "+" icon
6. Assign a reports to for any user who needs to route a form they fill in to their manager. For example a PTO request.
7. Submit the form

The Reports To field is a ComboBox. Begin typing the userid of the person this user reports to and a list of matching users displays. Select the Role and Enabled field values from the Dropdown choices.

Add Tenant Admin

You can add additional tenant admins by clicking the icon. This creates a new user with the special permission required to login and manage the tenant. You cannot add this special tenant admin role to an existing user. This is the only way to to grant this special tenant admin permission.  

If you want to disable a tenant admin, edit that user by clicking the button and add the frevvo.ReadOnly role. You can also delete all tenant admins except the initial tenant admin. The initial tenant admin is created when you create the tenant. One common case is that you need to remove admin access to a person who initially had that permission via the initial tenant admin. To do this:

1. Create a new tenant admin
2. Edit the original tenant admin and add the role frevvo.ReadOnly

Edit Admin Users 

There is also a short-cut to edit the initial tenant admin – click the button above the alphabet list to go directly to the initial tenant admin's edit page. You can also distinguish the initial tenant admin from non-admins because the initial tenant admin cannot be deleted so it does not have the  button. If you added additional tenant admins, the user list does not make it readily apparent that a user has that special admin access permission. Currently the way to distinguish an admin is click on each user's button and see if the user has the Manage Tenant functions. 

CSV Upload of Users and Roles

customers that have a large number of users with assigned roles, may need to import these (userids/roles) into . provides the ability to perform a bulk import of user data.

Only tenant admins may import user data and associated roles. The upload/download users links are available for tenants using all security managers. This feature is useful when creating/migrating a tenant that uses the LDAP or SAML Security managers.

Download Users and Roles

• Make sure you are logged in as the tenant admin. Click the Manage Users link.
• Click thedownload users csv file icon.
• This downloads a complete comma separated file that includes the list of the users and their assigned roles in the current tenant. Roles that exist in the tenant but are not assigned to any users will not be included in the file.The fields are comma separated. The following is an example:
  
  
  
  

The first row contains the column names. Descriptions of the field/column names in the file are listed in the table:

• Although csv files can be opened in other programs, they are best viewed through some kind of spreadsheet program. Here is the file when it is opened with Excel:

   

  

Upload Users csv file

Downloading the user csv file will provide you with the format needed to import users and their associated roles into . Once you have your csv file ready, follow these steps to upload it:

• Make sure you are logged in as the tenant admin. Click the Manage Users link.

• Click the upload csv users icon.
• Browse to your users csv file and then click Validate. User data is validated prior to successful import. You will see "Validating..." until the validation process is completed. It is useful to report the status especially if you are loading a large csv file. Once validation has succeeded without error, the Load button is enabled to allow the upload. When you click on the Load button, you will see "Loading...".
  
  
  
  

The image shows the the result of a validation that resulted in errors. Users data cannot be uploaded until the errors are corrected. The table showing the validation data is scrollable vertically when loading a large csv file.

• Click the Load button, the system uploads the same data again from the file. Another validation is performed and if still no error, the users are loaded individually or deleted if specified in the transaction column of the file. Roles are also inserted as necessary.
  

  

You will see this message with the number of roles and users that were created: "Users Loaded successfully. 3 Added, 1 Updated, 0 Deleted, 4 Roles Added." Uploading an empty users file displays the message "Users file is empty".

Updating Users and Roles using a CSV file

Once your csv file has been uploaded, it is very easy to update User and Role information. It is not necessary to reload your entire csv file every time you need to make changes. Simply create a csv file, with the proper format, that contains only the information that you want to change.

Existing users will be updated with the new information if you upload modified versions of your csv file. 

For example, let's say you have 19 users in your tenant. You want to change the last name of an existing user, and add a new user (mary) who will have the new role of (Coordinator).

• Create a csv file with the changes - change the last name of a user and add a new line for a new user (mary) with the role of Coordinator.
• When you upload the modified file, you will see this message: "Users Loaded successfully. 1 Added, 1 Updated, 0 Deleted, 1 Roles Added". The existing user will be updated with the new last name, the role of Coordinator will be created and new user Pat will be added with that role. 
• notifyNewUser for mary is set to TRUE, so Mary will receive an email to create her password.
  
  
  
  

Troubleshooting

Current Tenant Validation Error

If the csv file contains a name that is different from the current tenant, a validation error message displays. Upload the file again with the tenant field empty.

Spaces in Role Names

If there are spaces in the role names in your csv file, the message "role [the name of the role that contains the space for example: V P] - format not permitted (must start with a letter or _, max 16 chars from the set: a-zA-Z0-9_- ). Remove the spaces then upload the file again.

View User List

Click on a capital letter (A to Z) to display a list of users whose name begins with that letter. Click All to display all current users.

• Click at the top of the user list to add a new user.
• Click at the top of the user list to add a new tenant admin user.
• Click to display that user's home page.
• Click to edit that user's management functions.

• Click to upload a signature image file that will be applied to all forms/flows this user signs in place of his or her first and last name. Refer to Signature Images and  Electronic Signatures for more information.

• Click  to log into  as that user.
• Click to edit a user's profile including password, e-mail address, max upload attachment size, disable the user.
• Click  to remove a user from the server.

Adding Superusers 

The superuser admin, whose username is "admin" can add new superusers to the special d (default tenant). Note to login as the superuser enter the username admin@d (admin is the username and @d specifies the special default tenant). New Users added to the default tenant automatically become new superusers. This allows you to name additional superusers and then if you want you can disable the built-in superuser. To disable the build-it superuser named "admin" click the button above the alphabet list. This brings you directly to the build-in superuser admin's edit page, or you can click the icon to the right of the admin name in the user list. Set the Enabled dropdown to false. This will prevent further logins by the built-in superuser named "admin". Note you cannot delete the built-in superuser named "admin". You can however delete any additional admin user you have created.

Signature Images

The tenant admin can add/manage signature images for users that is applied to all forms/flows this user signs in place of his or her first and last name.

To upload a signature image for a user:

1. Click the add signature icon. The Manage Signature for ,userid> screen displays.
   
   
   
   
2. Browse to the location of the signature image file and select it.
3. Click the Upload/Delete button. A successful upload displays for the userid
   
   
   
   
4. To delete an existing signature file, check the Delete Signature checkbox then the Upload/Delete button.
   
   

Edit Users

Click the button next to any user in the users list to edit that user. You can perform functions such as adding/removing roles, resetting paswords, configuring the Max Attachment size per user, etc.

• The default maximum size for attachments in the frevvo Cloud is 20 MB or 20971520 bytes. In-house customers can use the frevvo.attachment.maxsize property to configure the maximum size for attachments.
• The Reports To field is a ComboBox. Begin typing the userid of the person this user reports to and a list of matching users displays. Select the Role and Enabled field values from the Dropdown choices.

Maximum Size for Attachments

 There are three places to set the maximum size of attachments in .

1. The server can be configured with a configuration property to specify the maximum size for attachments. The upper limit for attachments in the frevvo Cloud is 20 MB. Uploading attachments greater than this value shows this error message:
   
   
   
   
2. The tenant admin can set the maximum file size per user by editing their profile. Add the value in bytes to the Max Attachment Size field on the Edit User screen.  
   
   
   
   The value in this field overrides the max size value configured on the server level, as long as it does not exceed that value. For example, if the Server was set for 20 MB and the user profile was configured for 15 MB, the user sees this error message when trying to upload a 30 MB attachment:
   
   
   
   
3. Designers can specify the max file size per the Max Size property of individual Upload Controls. The image shows a 5 MB Max Size property specified for an Upload Control.
   
   
   
   If a user uploads a file larger than 5 MB to this control, they will see this error
   
   

The value of the Max size property of individual Upload controls overrides the value per user which overrides the max size property on the server level. All values must be specified in bytes. If a maximum file size is specified at the server level, the values in the user profile Max Attachment Size field and the Upload Control Max Size property cannot exceed the server max size.

Disable Users

The superuser or tenant admin can disable a user. Disabling a user prevents that user from logging into the form server. If the user has the role frevvo.Designer (aka. was a designer user) the users' forms will become inaccessible to other users. Even if the forms were public users will get the error "This resource belongs to a disabled user". To disable a designer user but keep the form accessible, change the user's role from frevvo.designer to frevvo.readonly and set the Enabled dropdown back to true. In this case when the user tries to login they will get the error "Login is currently disabled".

To disable a user click the icon to the right of the user's name in the user list. Set the Enabled dropdown to false. If this user is already logged into the form server they will be able to continue using the form server until they logout. At that point future logins will be blocked with the error "Your account is disabled".