controls may be marked as required or optional by setting the control's required property in edit mode. Controls that are generated from an uploaded schema will automatically be designated as required or optional depending on the schema (for example, whether the control is required based on the minOccurs value). Validation for controls you generate from schema elements depends on the element’s XSD type and other schema-specific information.

On form load, required controls that do not contain valid values have a visual indicator.  For example, an invalid control has a yellowish background when a required field is missing a value, and additionally, a warning icon when a control (either required or not) contains an invalid value.

Here is a form that is missing values in required fields.

Here is the form when the user has entered valid values into the required fields.

And another that has a value in the field but the value is invalid for the given field type. Notice the error message, yellow background and the warning icon. When the user enters a valid value in the phone control and clicks the Submit button the form will be submitted.

Note that the Email Address and Phone controls are optional. The form may be submitted even though there are no values in these controls. However, if the user enters an invalid value in one of the fields (required or not), will prevent form submission.

When a form has sections or tabs, the submission may not be allowed due to invalid controls that are not currently visible. For example, a section that is collapsed or a tab that is not currently selected may have an invalid control. This is indicated in the header section and tab label color changing to red.

Invalid Form Notification for Users

Consider the scenario where there are several required fields in a form and the user clicks the submit button having missed a few of them.  will not allow the form to be submitted due to the empty required fields. The user must provide the information for these fields but it is not immediately obvious what data is missing. The user is forced to scroll up the form to find the errors.

provides a method to show validation errors at the time of submission. Here's how it works:

• The Submit button is never dimmed.
• If you click Submit and the form is invalid (cannot be submitted) all invalid control fields are highlighted with a background color. The color shown in the image is the default. The designer can specify this color by changing the value for (Submit Error Highlight) in a Style and then applying that style to the form.

• Once the required fields have been filled and/or invalid data has been corrected, the highlight color will disappear and the form can be submitted by clicking the Submit button.
• The designer can add a message control(s) to the form with a customized message to alert the user that the form cannot be submitted and what they need to do to correct it.
  • The message control must contain your text in the message area and the CSS class f-submit-error specified in the CSS class property.
    
    
    
    
  • A message control with this CSS class is invisible by default. When the error condition is met, these message controls become visible.
  • You can use select a Message Type and use all the properties on the Style tab to style your message.
    
    

• Once the required fields have been filled and/or invalid data has been corrected, the highlight color will disappear and the form can be submitted by clicking the Submit button.

Be aware that error messages will stay visible even when you click the Submit button but you will not see them in the stored submission.

Sometimes, you click the Submit button and see that the form will not submit even when all required fields appear to be filled with valid data. The cause is always a hidden required field with no data or a hidden field with invalid data. You can find troubleshooting tips to resolve the issue here.

Optional Sections

Optional sections can cause the validity of a form to change dynamically. For example, consider the following form:

The Required property is selected for the Name field and all the controls inside of the Address section. The Required property is NOT selected on the Address section control making the section and the controls inside of it optional. If the user enters a valid value in the Name field then clicks Submit the form may be submitted.   However, if the user chooses to enter an address, then the controls in the Address section become required as indicated by the yellow background in the City, State and Zip fields.

If the user enters a value in the Street and City fields, then clicks Submit, the Zip field is highlighted with a background color and the form will not be submitted until valid values are entered in the three newly required fields.

If the user changes his/her mind and removes the value from the Street field,  will recalculate the validity of the form and infer that the Address section is no longer invalid since it is optional. The generated XML instance document will also not contain an address element. Once again,  is automatically ensuring that it is not possible to submit a form that is in an invalid state and that would generate an invalid document.

You can find information about the section Required property here.

Input Validation

Form fields added from ' control palette have built-in validation rules.  The table below details the default validation for each control type in ' palette. Patterns added to a control change the defaults.

If a user clicks submit and any of the controls listed above fails validation, the controls will be highlighted with an orange color indicating that the form cannot be submitted. See above for other methods to notify users when forms are invalid.

Patterns

Patterns imposes additional validation on what users enter in a particular control. See Designing Forms with Patterns for information on setting a pattern on any control in your form. Patterns are XML schema regular expressions.

If a user enters a value in a field that does not match the required pattern, a validation error displays when the user tabs out of the field. If the user clicks Submit without correcting the invalid data, then the field will be highlighted with a background color and submission will not be allowed. See above for other methods to notify users when forms are invalid.

Here are examples of typical scenarios where designers may want to apply patterns:

US Zip Code Pattern

A pattern that restricts a text control to only allow strings formatted as a US zip code: ##### or #####-####:

\d{5}|\d{5}-\d{4}

The form will flag an error unless the value entered is either five digits or five digits followed by the '-' character followed by 4 digits.

US/Canada Zip/Postal Code Pattern

This pattern validates US zip codes (##### or #####-####) and Canadian postal codes (L#L #L#).

>(\d{5}(-\d{4}))|(\d{5})|([ABCEGHJKLMNPRSTVXY]{1}\d{1}[A-Z]{1} *\d{1}[A-Z]{1}\d{1})

SSN

This pattern ensures that the user enters a valid Social Security Number:

\d{3}-\d{2}-\d{4}

Money

You should not try to apply a pattern to a money control. If you need to apply special behavior to a money control (for example, using three decimal places), we recommend using a text field, which affords a wider range of patterns you can apply. You could also use a number field and apply rules to it — such as rounding up to three decimal places.

Number Range

Patterns for number ranges are not as straight forward as you might imagine. If you want a quantity control allow to only numbers in the range 1-42 it is not sufficient to use the pattern [1-42]. Here is the pattern that will work:

([1-9]|[1-3][0-9]|4[0-2])

Numbers with commas

' default number control supports digits followed by an optional decimal point and multiple decimal places. Suppose instead you want to allow numbers containing commas and optionally starting with a '$' and only up to 2 decimal places. For example: $1,000.50 2,500. But also to allow numbers without the comma such as $1000. To do this:

• Add a text control to your form
• Set the pattern to: \$?([0-9]{1,3},([0-9]{3},)*[0-9]{3}|[0-9]+)(\.[0-9][0-9])?

If you do not want to allow the optional '$' then:

• Set the pattern to: ([0-9]{1,3},([0-9]{3},)*[0-9]{3}|[0-9]+)(\.[0-9][0-9])?

EMail pattern

If you use  In-house (downloaded and installed on your computer), you can change ' built-in patterns for the Email control by editing the ''types.xsd'' file included in the <frevvo installdir>/tomcat/webapps/frevvo.war file. This file includes the email type definition shown below, and you can edit its pattern value. See the example in the phone pattern section below for instructions to modify the types.xsd file.

<xsd:simpleType name="emailType">       
          <xsd:restriction base="xsd:string">        
                  <xsd:pattern value="[a-zA-Z0-9\-_][a-zA-Z0-9\-\+_]*(\.[a-zA-Z0-9\-\+_]+)*@([a-zA-Z0-9\-_]+\.)+[a-zA-Z]{2,6}"/>         
          </xsd:restriction>    
</xsd:simpleType>

Phone pattern

Lets say you would like to change the phone control validation from the ' current built-in pattern. Cloud customers must apply Patterns to a text control while in-house customers have two options

1. Apply patterns to a control - Like other control properties, the pattern property will not need to be redone when you upgrade .
2. Modify the built-in values in the types.xsd file. Be aware that if you modify the types.xsd file, you will have to make this change each time you perform a  upgrade or apply a  patch.

Apply a Pattern to a Control for a Phone Number

If you are using  Online, you will not have access to types.xsd. Both cloud and in-house customers, can override the pattern in the phone control by setting its pattern property. You can only restrict a built-in pattern (such as the phone control) but not change the pattern via the pattern property. For example you can add the pattern 203-\d{3}-\d{4}.  Now all phone numbers must start with area code 203.

A pattern such as ##-####-#### or ####-###-### is not a simple restriction. To impose validation against this pattern you must start with a Text control rather than a Phone control

1. Drag a Text control to your form
2. Add your pattern to the Text control's pattern property: \d{2}-\d{4}-\d{4} or \d{4}-\d{3}-\d{3}
3. Change the error message and help properties to assist the user in understanding the required pattern

Lets say you would like to change the phone control validation from the ' current built-in pattern. Cloud customers must apply Patterns to a text control while in-house customers have two options

1. Apply patterns to a control - Like other control properties, the pattern property will not need to be redone when you upgrade .
2. Modify the built-in values in the types.xsd file. Be aware that if you modify the types.xsd file, you will have to make this change each time you perform a  upgrade or apply a  patch.

Apply a Pattern to a Control for a Phone Number

If you are using  Online, you will not have access to types.xsd. Both cloud and in-house customers, can override the pattern in the phone control by setting its pattern property. You can only restrict a built-in pattern (such as the phone control) but not change the pattern via the pattern property. For example you can add the pattern 203-\d{3}-\d{4}.  Now all phone numbers must start with area code 203.

A pattern such as ##-####-#### or ####-###-### is not a simple restriction. To impose validation against this pattern you must start with a Text control rather than a Phone control

1. Drag a Text control to your form
2. Add your pattern to the Text control's pattern property: \d{2}-\d{4}-\d{4} or \d{4}-\d{3}-\d{3}
3. Change the error message and help properties to assist the user in understanding the required pattern

Modify the types.xsd file

frevvo OEM partners may choose this method when customizing .  The built-in values are shown in the image below:

Follow these steps to change the current buit-in pattern to  ##-####-#### or ####-###-###.

If you are using  In-house (downloaded and installed on your computer), you can change ' built-in patterns for the Phone control by:

1. Stop  if it is running. 
2. Unpack the frevvo.war file to a temporary location of your choice: e.g. c:\tmp\frevvo-war.
3. Edit c:\tmp\frevvo-war\WEB-INF\data\users\types.xsd,
4. Change the element phoneType as shown in the code block below: Save the changes to the types.xsd file. 

5. Rezip all the files in the c:\tmp\frevvo-war directory, even the ones you did not edit.

6. Zip will often give your zipfile a .zip extension. Make sure you change this to a .war extension. 

7. Copy the updated frevvo.war file to <frevvo installdir>/tomcat/webapps.
8. Restart your  form server. Now all your phone controls will validate against this pattern.

<xsd:simpleType name="phoneType">     
    <xsd:restriction base="xsd:string">         
        <xsd:pattern value="\d{2}-\d{4}-\d{4}"/>         
        <xsd:pattern value="\d{4}-\d{3}-\d{3}"/>
    </xsd:restriction> 
</xsd:simpleType>