...

Section

Column

frevvo supports the Azure Security Manager for Single Sign On. Users/roles are automatically pulled from Azure AD into frevvo cloud tenants and on-premise installations. Users are redirected to the Microsoft Azure login screen for authentication.

frevvo recommends using the SAML Security Manager for customers who want to manage users/roles from the UIthe frevvo UI.

Column

width	450px

On this page:

Table of Contents

maxLevel	4

...

Required: The frevvo.TenantAdmin and frevvo.Designer groups must be specified on your Active Directory server. The group names must be spelled as shown. Upper/lower case may be a factor for Open LDAP systems. These groups are required.

Tenant admin users must be assigned to the frevvo.TenantAdmin group.
Designer users must be assigned to the frevvo.Designer group

Optional: There are two additional roles in frevvo - frevvo.Publisher and frevvo.ReadOnly. These roles are optional.

In order to give a user the frevvo.publishers role, create the frevvo.Publisher group in your AD and assign users to it. Refer to the Publisher Role Documentation for an explanation of this role.
In order to give a user the frevvo.ReadOnly role, create the frevvo.ReadOnly group in your AD and assign users to it. Following frevvo Best Practice eliminates the need for this role.

Warning

Contact the frevvo Customer Success team to schedule your Security Manager configuration.
frevvo Best Practice recommends that you create a user account in your Active Directory that will house all of your deployed Production forms/workflows. This user can be named anything i.e.frevvoProduction but it must be a member of the frevvo.Designer group
Review the documentation on Preserving Projects/Forms/Workflows developed in your trial/starter tenant BEFORE changing security managers.
frevvo only supports the Azure Security Manager when is frevvo is running in the tomcat container. Refer to our Supported Platforms for the list of supported/certified Application Servers.

...

Follow these steps listed below to create a tenant frevvo tenant using the Azure SAML Security Manager:

...

frevvo assumes that customers have someone on staff that can successfully perform this step of the procedure. Information about is frevvo is listed below to help you with this process.

Info
The Azure global administrator MUST create the application for in frevvo in Azure.

If you are familiar with the Microsoft Azure Legacy Portal, review this Microsoft Training Guide before setting up the Azure application for frevvo.

Info
Do not include the curly braces in the URLs discussed below.

Login to the Microsoft Azure Management console: https://manage.windowsazure.com or https://portal.azure.com with your Azure global administrator account.
Click on the Azure Active directory link on the left side of the screen.
Click on the App Registrations link.
Click on the New application registration link for creating a new application.
Enter the following details:
1. Name:- Name of your frevvo Azure application
2. Select who can use this application or access this API

Configure the Redirect URL:

Cloud Customers should use https://app.frevvo.com:443/frevvo/web/saml/SSO/alias/{t} - replace {t} with name of your frevvo tenant.

Info

For example, if you were changing the Security Manager from the Default Security Manager to the Azure SAML Security Manager for a frevvo Cloud tenant named mycompany.com, the REPLY URL would be:

https://app.frevvo.com:443/frevvo/web/saml/SSO/alias/mycompany.com

On-premise customers should use http://<server>:<port>/frevvo/web/saml/SSO/alias/{t} - replace <server> with the ip of your server, <port> with the port number (if applicable) and t with the name of your frevvo in-house tenant.

Info

For example, if you were changing the Security Manager from the Default Security Manager to the Azure SAML Security Manager for a frevvo in-house tenant named mycompany.com, the REPLY URL would be:

https://<server:port>/frevvo/web/saml/SSO/alias/mycompany.com

Click Register.

Select the frevvo application from the list.
Click the Branding tab

Configure the Home Page URL:

Cloud Customers should use https://app.frevvo.com:443/frevvo/web/tn/{t}/login - replace {t} with the name of your frevvo Cloud tenant.

Info

For example, if you were changing the Security Manager from the Default Security Manager to the Azure SAML Security Manager for a frevvo Cloud tenant named mycompany.com, the SIGN-ON URL would be:

https://app.frevvo.com:443/frevvo/web/tn/mycompany.com/login

On-premise customers should use http://<server>:<port>/frevvo/web/tn/{t}/login - replace <server> with the ip of your server, <port> with the port number (if applicable) and t with the name of your frevvo in-house tenant.

Info

For example, if you were changing the Security Manager from the Default Security Manager to the Azure SAML Security Manager for a frevvo in-house tenant named mycompany.com, the SIGN-ON URL would be:

https://<server:port>frevvo/web/tn/mycompany.com/login

Click Save.

Click on the API Permissions tab.
1. Click Add a Permission.
2. Select Microsoft Graph.
3. For Application Permissions, select Directory.Read.All and optionally Directory.ReadWrite.All (under Directory).
4. For Delegated Permissions, select User.Read. (This permission may already be present.)
5. Click on the Grant Permissions button select "Yes" option and click on the Save button.

Click on the Expose an API tab.

Click Add a Scope. See this Microsoft Azure documentation for details.

By default, Azure provides the ApplicationID URI as api://<appId>.For example

Code Block
api://3f2fd3fd-67f5-423e-95bc-c01d3712966c

You may use a different AppID URI if desired. This table lists supported* formats:

api://<appId>	api://fc4d2d73-d05a-4a9b-85a8-4f2b3a5f39fe
api://<tenantId>/<appId>	api://a8573488-ff46-450a-b09a-6eca0c6a03ed/fc4d2d73-d05a-4a9b-85a8-4f2b3a5f39fe
api://<tenantId>/<string>	api://a8573488-ff46-450a-b09a-6eca0c6a03ed/api
api://<string>/<appId>	api://productapi/fc4d2d73-d05a-4a9b-85a8-4f2b3a5f39fe

*See this Microsoft documentation for additional available formats. frevvo has not verified with every format, so please use those not listed here with caution.

Click Save and Continue.
Provide the required attributes and choose a consent option. Usually this will be Admins and Users.

Click the Certifiates & secrets tab.
1. Generate the Client Secret. Copy the new secret's Value and save it in a notepad - you will need this for the frevvo tenant screen.
Click the Overview tab.
1. Copy the Application ID into your notepad. This is the value of the Client ID on the frevvo configuration screen.
2. Copy the Directory ID into your notepad. This is the value of the Tenant ID on the frevvo configuration screen.
  Click Endpoints at the top of the screen. Copy the Federation Metadata Document URL from the list to your notepad. This is the URL that you will use to generate the Azure metadata
  Code Block
  title Example of the Federation Metadata Document URL
  https://login.microsoftonline.com/3d532ac1-a43c-45c7-b0e9-cc814400ca11/federationmetadata/2007-06/federationmetadata.xml
Proceed to Step 2 - Create the frevvo metadata file

Warning

Just a reminder - you will need the Azure tenant ID, the client id and client secret for the frevvo application when configuring your Azure frevvo Azure SAML tenant.

We recommend making a note of your Client Secret expiration date. You will need to refresh it prior to the expiration to ensure continued access to frevvo. See this Microsoft article for details.

Step 2 - Create the frevvo metadata file

Follow these steps to generate the frevvo metadata for your Azure SAML tenant. You can do this even if the tenant has not been created yet.

...

Cloud Customers: https://app.frevvo.com:443/frevvo/web/saml/metadata/alias/{t} - replace {t} with the name of your tenant frevvo tenant - Ex; azuread
On-premise customers: http://<server>:<port>/frevvo/web/saml/metadata/alias/{t} - replace <server> with the ip of your server, <port> with the port number (if applicable) and t with the name of your frevvo tenant.

...

Browse the Federation Metadata Document URL that you copied to your notepad when creating the Azure application for frevvo. It is located on the Endpoints tab in your frevvo Azure application.

...

Step 4 - Create/edit the Azure SAML tenant

To successfully create a tenant frevvo tenant using the Azure SAML Security manager, you will need the following:

frevvo metadata file
The Azure SAML tenant Idp metadata file
Attribute mapping information
The Azure tenant ID, the client id and client secret key that are created as part of registering the frevvo application.

cloud frevvo cloud customers , migrating your tenant to the Azure SAML Security Manager , will make the changes via the Edit Tenant screen. Once accessed, follow these steps beginning with step 3.

Log onto

...

frevvo as the superuser (on-premise) or the tenant admin (cloud).
Access the Add Tenant (on-premise) or Edit Tenant (cloud) screen.
Select Azure SAML Security Manager from the Security Manager Class dropdown.
Copy the Service Provider (frevvo) metadata into the Service Provider field. You can include the xml prolog when you paste the Service Provider (frevvo) metadata.

Image Modified
Copy the metadata from the Azure tenant IDP file previously created and paste it into the Identity Provider field.

Image Modified
Enter the Federation Metadata Document URL that you copied from Endpoints in your frevvo Azure application. The URL is needed to handle Signing key rollover in Azure Active Directory. This URL is polled and refreshes the Azure IDP metadata every 3 hours. The new metadata is stored and automatically used as backup in case the URL is not accessible.

Code Block

title	Example of Federation Metadata Document URL

https://login.microsoftonline.com/fece6b7e-fbc6-4b3a-8287-fc07c29aa2d2/FederationMetadata/2007-06/FederationMetadata.xml

Check the Ignore Case checkbox if you are using LDAP for authentication and you want to ignore the case stored in LDAP systems for users/roles. The field is checked by default. Refer to the Mixed or Upper case User Names topic for more information.

Enter the User Id. This should be the User property name that identifies the user. A typical value is userPrincipalName, givenname etc.

Custom attributes can be mapped by typing the attribute names in the Custom field separated by a comma.

...

Configure a tenant admin account. This account account does not require Azure SAML authentication. This tenant admin can log directly into .

The tenant admin id, password and email fields are required. The Change password on next login is optional. It is checked by default.
When this tenant admin performs a form-based login i.e. /frevvo/web/login, the password entered on this screen is used for authentication. This is also the URL used by the API. For cloud customers the <base> is always https://app.frevvo.com.
If the tenant based login url is used i.e. /frevvo/web/tn/{t}/login then the Azure SAML login is used.

...

Configure the Business Calendar for your tenant. The escalation frevvo escalation feature will use this calendar to calculate deadlines and send notification notifications and reminder emails.

Enter HTTP Auth credentials if required. Credentials for external secure web services accessed by the forms and workflows in your tenant can be specified in this section.

...

Cloud Customers: https://app.frevvo.com:443/frevvo/web/tn/{t}/login - Replace {t} with the name of your Azure SAML tenant.
On-premise Customers:http://<server>:<port>/frevvo/web/tn/{t}/login. Replace <server> and <port> with your server information and t with the name of your Azure SAML tenant.
The user is redirected to the Azure login screen.
If the user is authenticated, screens frevvo screens display depending on the level of authorization specified for the user. Designer users will see the Projects Home Page while non-designer users will be directed to their Task List. You will see this redirection when logging into a space frevvo portal as well.

Note

Clicking the logout link in frevvo, logs the user out from onlyfrevvo only.

When a user logs in to spaceportal, the logout link will not be visible in an Azure AD (SSO) tenant.

When a user logs in to frevvo (non-space portal mode), the logout link will be visible in an Azure AD (SSO) tenant.

Cloud customers browsing app.frevvo.com or in-house customers browsing browsing http://<servername>:<port>/frevvo/web/login attempting to log into an Azure tenant directly (user@saml tenant name) will automatically be redirected to the Azure IDP login page.

Logged in User Display in Azure SAML frevvo tenant

If your Azure SAML userIds are in the format <username>@<domain name>, when you login to the tenant to frevvo the frevvo tenant name is appended to the userId . This is as designed. You will see <username@domain name@frevvo tenant name> as the logged-in user at the top of the screen. If your domain name is the same as your tenant frevvo tenant name, it will appear as if the domain name is listed twice.

Azure SAML Tenant Built-in Admin User

Just a reminder that the tenant admin account can login directly into frevvo or use the Azure SAML login.

When you create/edit a new tenant you are prompted to set up/modify a tenant admin user id, password and email address. This tenant admin does not authenticate via your Azure SAML IDP. It only exists in frevvo. If you experience an issue with your Azure SAML configuration such that you can't login as an Azure SAML authenticated user, use the built-in admin user to login to your tenant as a tenant admin in order to fix your Azure SAML configuration issue. Only one built-in tenant admin account is supported.

Image Modified

Browse this URL to login as the built-in: <base_URL>/frevvo/web/admin/login. When specified, will frevvo will prepend the base URL to the URLs in your Form/Document Actions. The <base_URL> is typically http(s)://<your servername>:<port>.

You must use the admin-specific URL - <base-url>/frevvo/web/admin/login - to login as the built-in.

Non-admin users can also login log in using the admin-specific URL.

If your tenant originally used the Default Security Manager and then you changed to the Azure SAML Security Manager, this tenant admin account has already been setupset up. If you have forgotten the password, you can change it by :

Browsing the admin specific URL - <base-url>/frevvo/web/admin/login. Enter the built-in userid. Click Forgot Password? This error message displays if any other user clicks on the Forgot Password? link after browsing the admin-specific URL:

Image Modified

Logging in as a Azure SAML authenticated tenant admin and changing the password via Manage Users.

Tip
The frevvo superuser admin (Cloud customers) and the in-house superuser can change the password for the built-in userid from the Edit Tenant page.

What if you do not remember the userid of your original tenant admin? Follow these steps:

...

Click Manage Users and click the edit admin icon.

Tip
The frevvo (Cloud customers) and in-house superuser can see the built-in tenant userid from the Edit Tenant page.

Session Timeout

Session timeouts are configured in and frevvo and in your Azure SAML IDP. If a user's session ends before the IDP timeout is reached, they will automatically be logged back into if frevvo if they try to access it again. It is recommended that the session frevvo session timeout and the IDP session timeout be configured for the same value.

...

Info
Embedding forms and workflows into your website is NOT supported if the the visibility of the form is set to Public in Tenant and the user is NOT already authenticated to Azure SAML. This is because frevvo must direct the user to the IDP login screen and the browser will not allow loading the IDP login page in frevvo's form iframe.

...

The Azure AD Graph API allows access to users, groups etc... in Azure AD. User entity attribute data exposed by the API for the logged-in user can be pulled into fields in your form/workflow with a business rule. If the attribute that you are looking for is not already exposed, you can:

Sync Azure AD to your in-house AD via the Microsoft-provided connector

Add an extension property

...

Login to your Azure SAML tenant as the as the tenant admin.

Click the Edit Tenant link

Add the custom attributes to the Custom section as a comma-separated list. The image shows the department and displayName attributes listed in the custom attribute section.

...

Section

Column

width	50%

Column

width	50%

Here is an example of a rule that will retrieve the custom attributes, department, and displayName, plus the standard attributes, First Name, Last Name, and Email address.

Code Block

language	js

if (form.load) {
    FirstName.value = _data.getParameter('subject.first.name');
    LastName.value = _data.getParameter('subject.last.name');
    EMail.value = _data.getParameter('subject.email'); 
    department.value = _data.getParameter('subject.department');
    displayName.value = _data.getParameter('subject.displayName');
}

...

On-premise customers using the tomcat bundle will see the following entry in the error the frevvo error log:

Code Block
Application error processing /frevvo/web/login?null java.lang.UnsupportedOperationException: null

Accessing a Space portal in a AzureAD tenant on a mobile device will not display a logout button.

Skew error when logging into an Azure tenant

Users logging into a frevvo Azure SAML tenant may encounter the error "Access Denied. Authorization Required". Examination of the frevvo.log shows the following entry:

Code Block
Response issue time is either too old or with date in the future, skew 60, time 2016-06-01T05:49:25.330Z

This error is typically caused by a clock synchronization issue between the SP (frevvo) and the Idp (Azure) or a genuine delay in the connection. If you get this error, you can change the value of the context parameter, com.frevvo.security.saml.response.skew, to specify the time in seconds allowed between the SAML request and response to a value greater than the default value of 60 seconds.

Follow the instructions listed in the Installation Tasks chapter to add the parameter.

Login into the

...

frevvo Azure SAML tenant fails

If the login into your Azure SAML tenant fails and the log frevvo log reports the following error, you may have to edit your Azure SAML tenant to add the metadata URL. T

...

Versions Compared

Old Version 1

New Version Current

Key

Step 2 - Create the frevvo metadata file

Step 4 - Create/edit the Azure SAML tenant